Ever thought about using the ground to heat and cool your home? It’s called geothermal heating and cooling, and it’s a fantastic way to use the earth’s energy to maintain the temperatures inside your home. That’s the mission and objective of www.pureairways.com – to give ducted air conditioning service for making your home fresh and cool.
It used to be that technologies, like geothermal heating and cooling, were outliers, but now my clients seem to be looking at the energy efficiency of every home they’re considering, they don´t know that the best z wave controller is available now, it is such a great item to have in your home. Almost any existing home can be converted over to geothermal, and new construction can incorporate it into the HVAC system, as well. I remember talking with an HVAC installer a couple of years ago, who told me that the cost to install a geothermal system was nearly the same as that of a traditional heat pump system, and the savings recouped made it a no-brainer.For more info on how to get rid of blackheads fast, please click the link.
“The temperature of the ground is about 68 degrees (Things I’ve read put this between 55-degrees, and 68-degrees – if you can confirm what it actually is, please let me know). Conductive, non-toxic fluid is pumped through the pipe and is heated or cooled (depending on its temperature) by the constant temperature of the ground. When that fluid returns to the surface, it transfers its temperature to the air being blown into the home’s ductwork. A good example here: Minnesota air duct cleaners aimed at your breathing cleaner air and saving money on energy bills.
That’s exactly how conventional, air-sourced heat pumps work, except that those systems use the temperature of the ambient outdoor air, which is far less predictable and constant than underground temperatures.
In winter, for instance, if the thermostat is set at 72 degrees, the heating coils in the pump only need to boost the incoming ground-conditioned, 68-degree fluid by a few degrees to achieve the desired temperature. The outdoor air temperature that day, however, is likely much colder, which requires far more energy from the pump’s heating coils to warm it sufficiently.
Because this type of ground-source system requires far less supplemental heating or cooling measures to achieve desired indoor temperature and comfort levels, it uses less energy. In turn, there’s less wear and tear on the heat pump, allowing it to operate at optimum efficiency for a longer period of time and with less maintenance.
Cost and payback: Until 2016, the Federal Government is offering a 30% tax credit on geothermal systems with no upper limit. This covers both the cost and installation of the units. These credits apply to both new construction and existing homes. The cost to install a geothermal system and the savings vary. Hypothetically, if a Geothermal system costs twice as much as a conventional air-sourced system, and cuts the monthly energy use and cost in half, there will be a substantial return on investment within a few years.
People with geothermal systems also report better and healthier indoor comfort, especially in the height of summer or winter when a conventional heat pump has a hard time conditioning the outside air to the desired indoor temperature,
checking subconsciousmindpowertechniques.com can help families make the decisions in order to have better comfort at home.
Geothermal heating and cooling systems may not be for everyone or every new-home condition, but they are a proven, energy-efficient option that delivers better performance and lessens environmental impact.”
Looking for a way to cut your energy-costs, either on a new or existing home? Check out geothermal … your wallet will thank you, and truthfully, the greater good may be in using resources more effectively.